In this article
- 01What holds an order
- 02An order paid for and not shipped
- 03What the licence rule covers
- 04The October 2025 rules and the January date
- 05The composition test and the export declaration
- 06What to ask before you pay
- 07Check whether a licence-free grade does the job
- 08Before the balance is due
- FAQFrequently asked questions
Key takeaways
- Announcement 18 of 4 April 2025 requires a Chinese export licence for neodymium (NdFeB) magnet material containing terbium or dysprosium. It sets no content threshold, and the exporter classifies each order from the composition test and the finished item.
- Grades up to N52SH can be made without a Chinese export licence, so we offer those first; UH and EH grades need a licence, applied for per order. N52SH made this way is not in volume production.
- A licence application needs end-user and end-use certificates from the end user. Decree 792 gives MOFCOM 45 working days after acceptance to decide, and MERICS reported in October 2025 that delays can stretch to months.
- On our shipments Chinese customs have asked for a composition test report before clearing NdFeB magnets, and someone has to file the export declaration. Before production starts, settle who files it and whether a report already exists.
- MOFCOM and China Customs said in Announcement 58 of 2026, published on 9 November 2026, that the October 2025 controls (holmium items included) stay suspended until 10 January 2027. Check the status again if your order ships from China near that date.
01
What holds an order
An order of neodymium-iron-boron (NdFeB) magnets can be held in China for three reasons a buyer can check before paying. The grade needs an export licence that has not been granted, and China's commerce ministry (MOFCOM) has 45 working days from accepting an application to decide. Customs is waiting for a composition test report.
Or the export papers do not match the goods or have not been filed. Before you pay, ask which grade is quoted, whether it needs a licence and who applies for it, who files the export declaration, and when the composition test report will exist. If a licence is needed, have the end-user papers ready on day one.
02
An order paid for and not shipped
In autumn 2026 a buyer wrote to us about an order placed with another supplier. Early in the year they had ordered their usual magnets from a long-standing supplier in China and paid 100% in advance. Months later the parts had not shipped. They had been told the delivery was held by customs because that type of magnet is under close control.
In the meantime they were buying the same magnets elsewhere at a much higher price, and they asked what we could do to make sure an order ships as promised. Nobody can promise a customs result, us included. What can be settled before production starts is the licence question and the paperwork, and that is where a buyer has some control.
03
What the licence rule covers
China licenses the export of NdFeB magnet material that contains terbium or dysprosium. The rule is Announcement 18 of 2025 from MOFCOM and China Customs, in force since 4 April 2025. It covers seven medium and heavy rare earths (samarium, gadolinium, terbium, dysprosium, lutetium, scandium and yttrium).
Its NdFeB items are permanent magnet material containing terbium and permanent magnet material containing dysprosium, and a note says the items include magnets and magnet powder. The text sets no content threshold. So the licence question is about what is in the magnet, and the grade name on the invoice does not answer it.
Terbium and dysprosium help a magnet resist demagnetising when it runs hot. In a grade such as N52SH the number is the strength and the letters are the temperature class. In our range the guide working temperature is 80 °C with no letter, 100 °C for M, 120 °C for H, 150 °C for SH, 180 °C for UH and 200 °C for EH, for a part about 0.7 times as thick as it is wide (a disc 10 mm across and 7 mm thick, say).
Grades up to N52SH can be made without a Chinese export licence, so we offer those first; UH and EH grades need a licence, applied for per order. N52SH made this way is not in volume production, so for a production order the SH grade is confirmed against your quantity. Each order is still classified with the exporter from the composition test and the finished item. Our guide to the licensing rules has the detail, including what MOFCOM has said about motor rotors and stators with the magnets fixed in.
A licence takes time and paperwork. China's regulation on export control of dual-use items (State Council Decree 792, in force since 1 December 2024) gives MOFCOM 45 working days from accepting an application to approve or refuse it, and Article 17 leaves time spent on identifying the item, expert consultation and on-site verification out of that count. MERICS reported in October 2025 that delays can stretch to months, and that incomplete or unclear information can cause significant delays.
Article 24 requires the exporter to submit end-user and end-use certificates issued by the end user, and MOFCOM can ask for a version issued or certified by a government body in the end user's country. The exporter cannot apply until it has those papers from the end user, the 45 working days only start once the application is accepted, and a licence can be refused.
The decree also has a general licence that covers repeated exports for up to three years (Article 15), so ask whether the exporter already holds one that covers your company.
04
The October 2025 rules and the January date
A second package of controls, published in October 2025 as Announcements 55 to 58, 61 and 62 of 2025, was suspended by Announcement 70 until 10 November 2026. On 9 November 2026 MOFCOM and China Customs said in Announcement 58 of 2026 that the package stays suspended from 11 November 2026 to 10 January 2027.
One of the suspended rules, Announcement 57, lists permanent magnet material containing holmium, and an SH grade can be made with holmium in place of dysprosium. Announcement 18 is not on the suspended list, and its licence requirement for terbium and dysprosium grades has applied throughout.
As of 14 November 2026 no MOFCOM notice says what happens after the suspension ends. If your order ships from China near that date, check the current status before you order.
05
The composition test and the export declaration
Magnets that need no licence can wait at customs too. Since the April 2025 rule, Chinese customs have asked us for a composition test report before clearing NdFeB magnets, to show what the material contains. On our orders the test is done on a small sample of the goods after production, the report ships with the order, and one report can cover repeat orders of the same grade and product for 12 months, though customs can still test a shipment again.
A European magnet retailer's notice to its customers, describing the situation as of October 2026, says the same and adds that customs also test magnet alloys at random, ferrite included, with the whole shipment waiting until the result is in. We found no official customs notice that sets this out, so treat both as reports from the trade.
The export declaration can be filed by the exporter itself or by a customs broker, and on our orders a licensed customs broker files it. Some brokers treat all magnets as dual-use goods, so a forwarder's broker may refuse to file for them, and cargo can be held for inspection even with the reports in hand.
Settle early who files, and make sure they have the contract, the invoice, the packing list and the composition report, all naming the same grade and quantity. Customs can still hold the shipment, but documents that agree with each other and with the goods leave less to query.
06
What to ask before you pay
Ask in writing and keep the answers with the order.
- Which grade is quoted, and does the material contain terbium or dysprosium?
- Does this order need an export licence? If it does, is one already in hand or will it be applied for after you order?
- Who is the exporter, the company whose name goes on the export declaration and on any licence? It may not be the company you pay.
- Who files the export declaration, the exporter itself or a customs broker? Some brokers refuse magnets.
- Is there a composition test report for this grade and product, or will one be made after production?
- What product description and customs (HS) code will be declared?
- Does the delivery date include the composition test and, for a UH or EH grade, the licence step? A date that only counts production time is wrong.
07
Check whether a licence-free grade does the job
How the magnet sits in your assembly sets its real temperature limit, so send the working conditions and the worst-case temperature with the drawing, or with a sketch if there is no drawing yet. Our design check gives a first temperature estimate for your shape. If an SH grade up to N52SH works, it can be made without a Chinese export licence.
The order is still classified with the exporter from the composition test and the finished part. Do not ask any supplier to relabel or split a controlled item to avoid a licence. Article 39 of Decree 792 penalises exporting without a licence and evading one by modifying or splitting the item.
08
Before the balance is due
The buyer above had paid in full and then had nothing to look at for months. On a first order, agree before you pay what evidence about the parts you will see before the balance is due.
FAQ
Frequently asked questions
Why was my neodymium magnet order held by customs in China?
Three causes a buyer can check: the grade needs a Chinese export licence (NdFeB containing terbium or dysprosium, under Announcement 18 of 4 April 2025) and none has been granted; customs is waiting for a composition test report or has sampled the goods; or the export papers do not match the goods. Ask the exporter which applies to your consignment and what document customs has asked for.
Do N52 or N52SH magnets need a Chinese export licence?
A magnet made without terbium or dysprosium is outside the NdFeB items in Announcement 18. Grades up to N52SH can be made without a Chinese export licence, so we offer those first; UH and EH grades need a licence, applied for per order. N52SH made this way is not in volume production. Each order is still classified with the exporter, and another supplier's grade of the same name may be made differently, so ask what the material contains.
What documents does a buyer send for a licensed magnet order?
Under Article 24 of Decree 792 the exporter submits end-user and end-use certificates issued by the end user, and MOFCOM can ask for a version certified by a government body in the end user's country. Expect to name the end user, the product the magnets go into and its use, and to commit not to change the use or pass the items on without approval. Send them early, because the review period runs from acceptance of the application.
How long does a Chinese export licence for magnets take?
MOFCOM has 45 working days from accepting an application to approve or refuse it, with some review time not counted, and MERICS reported in October 2025 that it can take months. Plan the delivery date around the licence step for any UH or EH grade.
What happens to holmium magnets when the suspension ends?
Announcement 57 of 2025 lists permanent magnet material containing holmium. MOFCOM and China Customs said in Announcement 58 of 2026 that it stays suspended, with the rest of the October 2025 package, until 10 January 2027. As of 14 November 2026 no MOFCOM notice covers the period after the suspension. Check MOFCOM's announcements before ordering an SH grade that ships near then.
Can a supplier guarantee my magnets will clear Chinese customs?
No. A supplier can confirm the grade, provide the composition test report, apply for any licence the order needs and make the documents match the goods. Customs decides on release.
Send the drawing or a sketch, the working temperature, the quantity and the destination. A person replies within 1 business day.
Related reading
